Filter
Top Products
136 Chapter 7 Configuring application settings
214394-A
4 Do one of the following:
• Click Submit.
• Click Back to return to the VLAN Configuration page without making
changes.
The modified VLAN configuration is displayed in the VLAN Table
(Figure 61 on page 132).
Selecting a management VLAN
You can select any VLAN to perform as the management VLAN. VLAN 1 is the
default management VLAN for the switch. To set this field, the VLAN State field
value must be active.
To select a VLAN as the management VLAN:
1 From the main menu, choose Application > VLAN > VLAN Configuration.
The VLAN Configuration page opens (Figure 62 on page 133).
2 In the VLAN Setting section, choose the VLAN to assign as your
management VLAN.
3 Click Submit.
Deleting a VLAN configuration
To delete a VLAN configuration:
1 From the main menu, choose Application > VLAN > VLAN Configuration.
The VLAN Configuration page opens (Figure 62 on page 133).
2 In the VLAN Table, click the Delete icon for the entry you want to delete.
A message opens prompting you to confirm your request.
3 Do one of the following:
• Click Yes to delete the VLAN configuration.
• Click Cancel to return to the VLAN Configuration page without making
changes.