Filter
Top Products
Chapter 5 Configuring remote network monitoring (RMON) 91
Using Web-based Management for the BayStack 380-24F Gigabit Switch
2 In the System Log (View By) section do one or more of the following:
• Choose the number of the switch from which to display messages.
• Choose where to display messages from.
• Choose to clear messages from Volatile or Non Volatile memory.
3 Click Submit.
The results of your request are displayed in the System Log section (Figure 33
on page 90).
Table 35 System Log page fields
Section Field Range Description
System Log Display
Messages From
(1) Non Volatile
(2) Volatile + Non Volatile
Choose to display messages from Non Volatile memory
(NVRAM) or Volatile (DRAM) and Non Volatile memory.
The default settings is Non Volatile.
Clear Messages
From
(1) Volatile
(2) Volatile + Non Volatile
(3) None
Choose to clear messages from Volatile memory or
Volatile and Non Volatile memory.
The default settings is None (do not clear messages)
System Log Index The number of the event.
Time Stamp The time, in hundreths of a second, between system
initialization and the time the log messages entered the
system.
Message Type The type of message. The options are (1) Critical, (2)
Serious, and (3) Informational.
Message A character string that identifies the origin of the
message and the reason why the message was
generated.