Filter
Top Products
56 Chapter 4 Configuring the switch
214394-A
Configuring an SNMPv3 system user group membership
You can view a table of existing SNMPv3 group membership configurations and
map or delete an SNMPv3 user to group configuration.
Mapping an SNMPv3 system user to a group
To map an SNMPv3 system user to a group:
1 From the main menu, choose Configuration > SNMPv3 > Group
Membership.
The Group Membership page opens (Figure 17).
Figure 17 Group Membership page
Table 18 describes the items on the Group Membership page.