Filter
Top Products
Chapter 4 Configuring the switch 81
Using Web-based Management for the BayStack 380-24F Gigabit Switch
Table 30 describes the items on the Configuration File Download/Upload
page.
2 Type information in the text boxes, or select from a list.
3 Click Submit.
Requirements for storing or retrieving parameters on a
TFTP server
The following requirements apply when storing and retrieving configuration
parameters on a TFTP server:
• The Configuration File feature can only be used to copy switch configuration
parameters to other switches.
• A configuration file obtained from a switch can only be used to configure
other switches that have the same firmware revision and model type as the
donor switch.
• The configuration file also duplicates any settings that exist for any GBIC that
is installed in the donor switch.
• If you use the configuration file to configure another switch that has the same
GBIC model installed, the configuration file settings will also apply to and
override the existing GBIC settings.
Table 30 Configuration File Download/Upload page items
Item Range Description
Configuration Image
Filename
1..32 Type the configuration file name.
TFTP Server IP Address XXX.XXX.XXX.XXX Type the IP address of the TFTP load host.
Copy Configuration Image
to Server
(1) Yes
(2) No
Choose whether or not to copy the configuration image to the
server.
Retrieve Configuration
Image from Server
(1) Yes
(2) No
Choose whether or not to retrieve the configuration image from a
server. If you choose Yes, the download process begins
immediately and, when completed, causes the switch to reset with
the new configuration parameters.