Filter
Top Products
Chapter 4 Configuring the switch 77
Using Web-based Management for the BayStack 380-24F Gigabit Switch
Table 27 describes the items on the High Speed Flow Control page.
2 Select from the lists.
3 Click Submit.
Downloading switch images
You can download the BayStack 380-24F Gigabit Switch software image that is
located in non-volatile flash memory. To download the BayStack 380-24F Gigabit
Switch software image, a properly configured Trivial File Transfer Protocol
(TFTP) server must be present in your network, and the policy switch must have
an IP address.
To learn how to configure the switch IP address, refer to “Configuring BootP, IP,
and gateway settings” on page 42.
Table 27 High Speed Flow Control page items
Item Range Description
Autonegotiation (1) Enabled
(2) Disabled
Choose to enable or disable the autonegotiation feature.
When enabled, the port supports 1000Mb/s operation in full-duplex
mode.
Flow Control (1) Enabled
(2) Symmetric
(3) Asymmetric
Choose your flow control preference to control traffic and avoid
congestion on the GBIC port.
Caution: Do not interrupt power to the device during the software
download process. A power interruption can corrupt the firmware image.