Filter
Top Products
Chapter 8: BootMagic94
To launch BootMagic’s configuration program from the rescue diskette, boot from the
rescue diskette and follow the on-screen instructions.
Once in the configuration program, you can make any needed modifications or additions.
When you click Save/Exit to exit the configuration program, BootMagic re-saves all the
necessary files and rewrites the MBR, thereby restoring the program to normal.
Getting Help
Refer to the BootMagic online help for information about all BootMagic features that are
not discussed in this chapter.
• To access Help in the Windows configuration program, select Help
➤ Contents
from the menu bar.
• To access Help in the DOS configuration program, select Help
➤ Topic List from
the menu bar.
• To access context-sensitive Help, click Help in the lower-right corner of most
dialogs, or press <F1>.
Configuring BootMagic
BootMagic’s configuration program consists of two versions: one for DOS and one for
Windows. Both versions have similar interfaces and offer the same functionality.
BootMagic’s configuration program may be manually launched by any of the following:
• In Windows, select Start
➤ Programs ➤ BootMagic 8.0 ➤ BootMagic
Configuration.
• In DOS, run
drive
:\BTMAGIC.PQ\CONFIG.BAT.
• On the PartitionMagic main screen, click Tools
➤ BootMagic Configuration.
• You can run a DOS version of the BootMagic configuration program from the Norton
PartitionMagic CD if your computer has the ability to boot from a CD.