Filter
Top Products
Norton PartitionMagic 117
4 To exit PartitionInfo, click Close.
Generating Diagnostic Reports with PARTINFO.EXE
You can also run PARTINFO.EXE from the first rescue disk to get partition information.
The PARTINFO program provides essentially the same information as the PartitionInfo
program but without the GUI interface.
1 Boot the computer to DOS.
2 Insert the first rescue disk.
3 You have several options for running PARTINFO.
Error Messages and Solutions
PartitionMagic error messages and possible solutions are listed below by number. The
messages are also grouped in number ranges by error category.
Miscellaneous Errors (3–38)
#3 Not enough memory
This error can occur when you are resizing, moving, or copying an extremely
large partition (60 GB) or when manipulating smaller partitions in DOS with
EMM386 loaded. EMM386 limits the amount of memory the program can
To print a report Click Print, then click OK.
To do this: Do this:
To display partition
information on your screen
Type PARTINFO, then press <Enter>.
To send a report directly to
your printer
Type PARTINFO >LPT1 or PARTINFO
>PRN, then press <Enter>.
To save the report as a text file
on a floppy disk
Type PARTINFO >A:\PARTINFO.TXT,
then press <Enter>.
To do this: Do this: