Filter
Top Products
160
Setting Conditions for Communications with Host by Using Memory Switches Section 6-7
6-7-5 Setting the Memory Link Method
Set the communications conditions for the host link method at serial port A or
serial port B by following the operation from the System Menu shown below.
Check the communications settings of the host to be used.
Select Maintenance Mode.
Select Memory Switch.
In this example, serial port A is used.
In this example, serial port A is used.
Ver 4.12
Display the fourth memory switch
screen by pressing the [↓] (next screen)
or [↑] (previous screen) touch switch.
Press the touch switch corresponding to the
port at which the memory link method is to
be set (Comm. A Method or Comm. B
Method) to display the setting option
Memory Link.
The setting option changes each time the
touch switch is pressed.
Press the Set touch switch to the right of the
port at which the setting has been made.