Filter
Top Products
168
Various System Settings Section 6-9
6-9-5 Setting the Printer Controller
The NT631/NT631C has a function for printing out data at a printer connected
to it in response to an instruction from the host or operation at the NT631/
NT631C. Three types of printer can be connected to the NT631/NT631C:
select the type used with this memory switch setting.
•ESC/P:
Printers that conform to Epson’s ESC/P 24-J83C (color) printer control
specifications or printers that conform to Epson’s ESC/P 24-J82 (mono-
chrome) control specifications.
• PC-PR201H:
Printers that can emulate the PC-PR201H, made by NEC Corp.
•PCL 5:
Printers that conform to the PCL 5 printer control specifications.
Note that the NT631 can only be used with the monochrome Tone setting and
does not support color printing.
For the NT631, the Print Method is fixed as Tone.
The default (factory) setting is ESC/P.
Reference: • In addition to this setting, NT631C has the Print Method setting
(page 169).
• For details on the print function, refer to 2-15-7 Print Function in the Ref-
erence Manual.
Set the printer controller setting by following the menu operation from the Sys-
tem Menu shown below.