Filter
Top Products
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
TOP Master
Host Computer #1
Single-Bus Module
Single-Bus Module
2-CH Ultra
Extender Card
I/O Interface Card
2-CH Differential
Converter Card
I/O Interface Card
SAF-TE Card SAF-TE Card
Differential SCSI Data Cable (25 meters)
1 meter Ultra Wide SCSI Jumper
Chl #0
Chl #1
Chl #0 Chl #1
Chl #0 Chl #1
Chl #0 Chl #1
Chl #2
Differential SCSI Data Cable (25 meters)
1 meter Ultra Wide SCSI Jumper
TOP Slave #1
TOP Master
Host Computer #1
Differential SCSI
Host Adapter
Available Drive
Unavailable Drive
I/O Interface Card
SAF-TE Card SAF-TE Card
Differential SCSI Data Cable (25 meters)
Chl #1
Chl #1
Chl #0 Chl #1
Chl #0 Chl #1
Chl #0 Chl #1
7 Connect one end of a 25 meter data cable to the
Channel #1 connector on the differential host
adapter.
8 Connect the other end of the data cable to the
Channel 1 connector on the upper or right side two-
channel Differential Converter Option card installed
in the “master” cabinet.
9 Connect one end of a 1 meter jumper cable to the
Channel 0 connector on the lower or left side I/O
Interface card in the “master” cabinet.
10 Connect the other end of the 1 meter jumper cable to
the Channel 0 connector on the lower or left side
two-channel Ultra Extender Option card installed in
the “slave #1” cabinet.
11 Connect one end of a second 25 meter data cable to
the Channel #2 connector on the differential host
adapter.
12 Connect the other end of that data cable to the
Channel 0 connector on the upper or right side 2-
channel Differential Converter Option card in the
“master” cabinet.
13 Connect one end of a second 1 meter jumper cable to
the Channel 1 connector on the lower or left side I/O
Interface card in the “master” cabinet.
14 Connect the other end of the second 1 meter jumper
cable to the Channel 1 connector on the lower or left
side two-channel Ultra Extender Option card
installed in the “slave #1” cabinet.