Filter
Top Products
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
6 Install a two-channel Ultra Extender Option card
into the upper or right side card slot and tighten the
thumb screws.
Ultra Extender
Option Card
I/O Interface Card
7 Repeat steps 5 and 6 for the second (Slave #2)
cabinet.
2-CH Differential
Converter Card
1-CH Ultra
Extender Card
TOP Slave #2TOP Slave #1
TOP Master
Host Computer #1
Dual-Bus Module
Differential SCSI
Host Adapter
SAF-TE Card
I/O Interface Card
Single-Bus Module
Single-Bus Module
SAF-TE Card
1-CH Ultra
Extender Card
SAF-TE Card
I/O Interface Card
I/O Interface Card
Differential SCSI Data Cable (25 meters)
Differential SCSI
Data Cable (25 meters)
1 meter Ultra Wide SCSI Jumper
1 meter Ultra Wide SCSI Jumper
Chl #0
Chl #1
Chl #2
Chl #1
Chl #0 Chl #1
Chl #0 Chl #1
Chl #0 Chl #1
Chl #0 Chl #1
Chl #0 Chl #1
Note: Secure the cable connectors using the thumb
screws (finger tight only).
8 Connect one end of a 25 meter data cable to the
Channel #1 connector on the differential host
adapter.
9 Connect the other end of the data cable to the
Channel 0 connector on the lower or left side 2-
channel Differential Converter card installed in the
master cabinet.