Filter
Top Products
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Hot Swap Power Supplies — Dual hot swappable
power supplies expandable to three, all with current
sharing circuitry. Power supply system provides
monitoring and sequencing.
Cooling — Dual high capacity cooling fans.
Notifications — LEDs and audible alarms provide
failure notifications.
Inside door panel Fault LEDs provide drive failure
identification.
Front Panel — A password protected Operator
Control Panel (OCP) for administration control and
monitoring functions, including control of SCSI ID
settings. Animated OCP icons for an “at-a-glance”
determination of system status.
Option Cards — Full support for Option cards
available in Differential Converter and Ultra
Extender versions providing data transfer rates up
to 40 MBs per second. Both support either single or
dual bus Differential SCSI and Ultra SCSI
applications.
Termination — Option cards configured for
automatic SCSI-bus termination.
Remote/Delay Start — A backplane jumper
provides for subsystem control of disk drive spin up
delay when the adapter does not supply this
feature.
SCSI-to-SCSI Support — Support for an Ultra S2S
RAID Controller providing on-board Ultra SCSI-to-
Ultra SCSI RAID processing.
Locking Door — A key-locking front door that
deters unauthorized access to the drives,
controllers, and power switch.
SAF-TE — Complete support of SAF-TE v1.0
standards (SCSI Accessed Fault Tolerant Enclosure)
protocol.
Cluster-Ready — Cluster-ready subsystem (refer
to the Ultra S2S User’s Guide).
OS Support — Supports the following OS
platforms: Novell NetWare, Microsoft® Windows
NT™, and SCO UNIX compatible.