Packard Bell ST8000 Computer Drive User Manual


 
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Installation Precautions
Please observe the following cautions and notes prior to
and during installation:
Printed circuit board components are sensitive to
electrostatic discharge. To prevent operating failure
or damage, observe the following: Establish a
ground for yourself by using the wrist grounding
strap, or by touching the metal chassis prior to
handling or installing the printed circuit board
components.
Exercise care when handling any electrical
component.
Do not overtighten the thumb screws on the feature
cards and cable connectors. Secure them to finger
tight only.
Interface and feature cards are keyed and will
install only one way.