Filter
Top Products
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
LED Descriptions
Use the following LED description matrix to determine the status of
the DEU LEDs when the SAF-TE card is installed and the RAID
controller is powered on.
SAF-TE LED Matrix
AT POWER UP Steady Green Steady Green
DRIVE READY
NOT ASSIGNED
Blinking Green Steady Green
DRIVE READY
ASSIGNED
Steady Green Steady Green
HOT SPARE READY
ASSIGNED
Blinking Green Steady Green
DRIVE ERROR
NOT ASSIGNED
Blinking Green Steady Amber
DRIVE ERROR
ASSIGNED
Blinking Amber Steady Amber
Blinking GreenUNASSIGNED DRIVE
Steady GreenASSIGNED TO ARRAY
ARRAY IS FAULT-TOLERANT
ARRAY IS IN REBUILD MODE
ARRAY HAS A FAILED DRIVE
HOT SPARE
ALL EMPTY BAYS
FAILED DRIVE
REBUILD MODE
Steady Green
Steady Amber
Steady Amber
FIRMWARE CHECKSUM ERROR Alternating Amber and Green
Blinking Green
Off
Blinking Amber
Steady Amber (all drives)
ARRAY CRITICAL
REMAINING GOOD DRIVES
Steady Amber Steady Amber
HOT SPARE
REBUILD MODE
Steady Amber Steady Amber
DRIVE MANUALLY
DISABLED
Blinking Amber Steady Amber
STATUS LEDs
STATUS LEDs
CHANNEL MODE LEDs
CHANNEL MODE LEDs