Filter
Top Products
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Quick Install
The following procedures outline the steps necessary to
setup your DEU subsystems. These guidelines are
generally for those individuals who don’t like to read
manuals.
Install the Disk Drives — Open the front door of
each cabinet and insert the disk drives. Be sure
each drive seats properly and the drive latches are
secured.
Install the Option Cards — Install the correct
Option cards in the correct slot for your
configuration.
Connect the Cables — Connect the data and
jumper cables. Refer to DEU Subsystems
Installations later in this section for the supported
configurations under Single-ended Ultra SCSI or
Differential SCSI.
Configure your system — Run your system
configuration program to setup the drives, and/or
your RAID software configuration.