Filter
Top Products
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
SCSI Bus Access Failure
The Channel Mode LED will blink amber four times
and the speaker will sound four tones. This indicates
that either the SCSI controller failed to respond to a
reset command or another device has control of the
SCSI bus.
Note that this may be caused by other devices having
control of the bus at the time the DEU is powered ON.
After the tones have sounded, there will be a two
second delay, and the microprocessor will again
attempt to initialize the SCSI controller. Turning the
system OFF then ON again may help resolve this
condition. Normal operations will be impossible while
the SCSI controller remains unresponsive.
All drive LEDs will be solid green regardless of the
error conditions. The DEU needs to be serviced if this
error occurs consistently and is not cleared by cycling
the power on the DEU. Contact Technical Support.
Note: The DEU will not respond to the software if this
error occurs.