Filter
Top Products
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Installing the Third Power Supply
If you will be installing five (5) or more disk drives you
will be required to install the third power supply.
Note: There is no need to power off the DEU or the
computer system. The power supplies are hot
swappable.
1 Loosen the two screws on the Power Supply #3 cover
plate using a flat-blade screwdriver and remove the
cover plate.
2 Remove the power supply from its shipping package.
3 Install the third power supply by sliding the PSU
into the cabinet until it reaches its locked position.
Orient the supply as indicated in the illustration.
Note: Use care when inserting the power supply into
its fully seated position. Do not use a strong force to
seat the PSU into its mating connector.
Power Supply #3
4 Remove the blanking plug for the LED on the cover
plate.
5 Re-install the cover plate. Secure the cover plate
with the two screws using a flat-blade screwdriver
securing the power supply.