Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
8
PRECAUTIONS
1. Installation
1
The DP-6530/8130 should be installed by a qualified service representative.
Note: The packing material should be disposed of properly.
2
To obtain the best possible results, this machine should be used in conjunction with a
dedicated AC power line with the following ratings.
115 V - 60 Hz, 16 A
Notes:
1. The use of other appliances or other equipment on the same line as this machine may adversely
affect performance and copy quality.
2. Be sure to use a 3-conductor, grounded wall outlet.
3. In areas, except USA and Canada, where a 2-pin plug is used, the machine must be grounded for
safety.
Never ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.
4. The power supply cord is used as the main disconnect device, ensure that the socket-outlet is
located/installed near the equipment and easily accessible.
3
After a suitable place has been selected for installation of the DP-6530/8130, please do
not change it. Avoid excessive heat, dust, vibration and direct sunlight.
Also, provide proper ventilation as the machine emits a small amount of ozone.
Notes:
1. The recommended environmental range for use is as follows:
• Temperature: 10~30 °C/50~86 °F
• Humidity: 20~85 % RH (Non condensing)
2. To insure optimal operation, allow clearances of at least 31.5” on the left, 31.5” on the right and 3.9”
behind (refer to the illustration below).
The socket outlet should be near the equipment and be easily accessible.
3.9"
31.5"
31.5"