Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
3-2
SETTING OF BASIC COPY MODES
4
Press the START key.
1. PAPER SELECTION
Automatic Paper Selection (APS)
- If the Automatic Paper Selection mode is not selected,
press the ZOOM··· key, then press the APS key on the
next screen.
- If the following messages are shown, proceed as directed:
When you place regular-sized originals on the glass or in the reversing automatic document feeder, the
built-in sensors automatically work to detect the size of the originals, helping the machine select and copy
on paper that is the same size as the original.
* Depending on the condition of the original, automatic paper selection may not work correctly. In that
case, select the paper size manually.
Page 3-3
* This mode can only be used for actual-size (100%) copying.
* Original sizes capable of automatic detection Page 2-9
2
Place the original(s). Page 2-9
3
Confirm that the Automatic Paper Selection mode
(default setting) is selected on the basic screen.
1
Place paper in the drawer(s). Page 2-4
Select other copy modes as required.
Change direction of original
Set correct drawer
When the selected drawer size and the original size are the
same, the machine rotates the original data 90° and makes a
copy in the same size as the original even if those directions
differ (e.g. a LT-size original is set while the same size paper is
set in R direction). This function, however, is applicable to plain
paper only.