Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
5-2
USING THE SPECIAL FUNCTIONS
Select other copy modes as required.
5
Press the START key.
When the number of originals is too large to be set at one
time, you can divide the originals into two to ten sets and
set them one after another. To do so, place the first set of
originals first, and press the CONTINUE key while the
scanning is in progress. After they have been scanned,
place the previous set of originals.
3
Press the PROGRAM key to enter the program
menu, and press the ADF key.
1. CONTINUOUS ORIGINAL FEEDING / SINGLE ORIGINAL FEEDING
When using the reversing automatic document feeder, you can select the continuous feed mode (default
setting) where multiple (or single) originals are continuously fed in one by one, or the single-feed mode
where if you insert an original, it is automatically pulled in and starts being copied.
1
Place paper in the drawer(s). Page 2-4
Continuous Feed Mode
2
Place the original(s) on the reversing automatic
document feeder. Page 2-11
- Originals can be set maximum 100 sheets at a time.
4
Press the ADF key.