Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
8-4
MAINTENANCE
Is the reversing automatic
document feeder firmly
closed?
Is the original cover or the
transport belt of the reversing
automatic document feeder
dirty?
Is the scanning area dirty?
Is the copy density set
properly?
Reference page
Page 7-3
Select the same size of copy paper as the
original, or set the reproduction ratio suitable
for the paper size.
Set a smaller image shift value.
Are the original size and
direction, as well as the
reproduction ratio, suitable for
the paper size?
Is the margin on the copy set
properly?
Countermeasure
Place the original firmly on the glass and
close the reversing automatic document
feeder.
Replace with new paper.
Items to be checked
Does the entire original lie
properly on the surface of the
glass?
Is the copy paper moist?
Copy images are blurred
Images are partially missing
Page 3-2, 3-4
Page 4-2
2. SIMPLE TROUBLESHOOTING (Cont.)
Copies are stained
Close the reversing automatic document
feeder firmly to shut out any outer light.
Clean the original cover or the transport belt.
Set the copy density properly with the
AUTO key or manual density keys.
Page 2-10
Page 8-2
Page 3-11
Is the copy density adjustment
set darker than is standard?
Copy density is too high
Use the manual density keys to set the copy
density properly.
Page 3-11
04/09/02, 16:534