Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
5-19
11. USER SELECTION (Initial settings)
1
Press the PROGRAM key to enter the program
menu, and press the USER SELECTION key.
- If the desired function keys are not displayed, press the
Next key to change the menu screen.
2
Press the icons of the settings you desire
(selected settings will be shaded), then press the
SET key.
- The keys in the shaded pattern on the screens shown on
the right are initial settings (default settings).
You can change the initial setting (default setting) of each mode displayed on the User Selection screen.
After changing the setting, there are two procedures as follows.
Mode that is automatically reflected in the default setting after changing the setting
- Hole Punch the tab paper
Mode that is automatically reflected in “when automatic function clear mode works” or “when
FUNCTION CLEAR key is pressed”
- Image Direction - Set Tab Extension - Quick Menu Display
- Initial Screen
- Follow the procedure of the tab paper mode display.
Page 4-25
When the “NO” in the display of quick access menu is
selected, the initial menu cannot be selected.