Filter
Top Products
Part IV Sequencer
102
QQTG0692
Sequencer
VELOCITY CHANGE
Modify the recorded velocity in specific mea-
sures of specific tracks.
1.
Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEAS
∧
and
∨
buttons to
specify the start point (measure number) of
the velocity change.
3.
Use the LAST MEAS
∧
and
∨
buttons to spec-
ify the end point (measure number) of the
velocity change.
4.
Use the VELOCITY
∧
and
∨
buttons to specify
the change in velocity.
• The value you select will be added to or
deleted from the current velocity.
5.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
TRANSPOSE
Change of key of specific measures of specific
tracks.
1.
Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEAS
∧
and
∨
buttons to
specify the start point (measure number) of
the transpose.
3.
Use the LAST MEAS
∧
and
∨
buttons to spec-
ify the end point (measure number) of the
transpose.
4.
Use the TRANSPOSE
∧
and
∨
buttons to
specify the change in pitch.
• Increments are in semitones. A value of 12 is
one octave. A – value lowers the pitch, and a
+ value raises it.
5.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
09_Part IV.fm 102 ページ ２００３年２月５日 水曜日 午後１時３４分