Filter
Top Products
Part XIII MIDI
185
QQTG0692
MIDI
Ⅲ
ⅢⅢ
Ⅲ
Storing user settings
After you change the MIDI settings, you can
store your customized settings in USER.
1.
Adjust the various MIDI settings.
2.
Go to PAGE 4/4 of the MIDI PRESETS dis-
play.
• The display looks similar to the following.
3.
Use the WITH SPLIT POINT? button to spec-
ify whether or not to also store the keyboard
split point (YES/NO).
4.
Press the WRITE button.
Ⅲ
ⅢⅢ
Ⅲ
Recalling the USER settings
1.
Go to PAGE 3/4 of the MIDI PRESETS dis-
play.
2.
Press the OK button.
Computer Connection
These settings are used to select the mode related to MIDI signal flow when a personal computer is con-
nected to the USB terminal of this instrument.
• When connecting to a personal computer, install the USB driver on the included CD-ROM to the com-
puter first. (Refer to the separate manual for more information.)
1.
Turn off the power to this instrument.
2.
Connect a personal computer to the USB ter-
minal on the rear of this instrument.
3.
Turn on the power to this instrument.
4.
On the MIDI MENU display, select COM-
PUTER CONNECTION.
• The display looks similar to the following.
5.
Use the
∧
and
∨
buttons to select a mode.
NORMAL:
Ordinary mode
PC as master:
The mode which is appropriate for data trans-
mission
KN as master:
The mode when this instrument is used as the
master keyboard.
KN as slave:
The mode when this instrument is used as a
slave instrument.
INTERFACE:
The mode when this instrument is used as a
connecting device between a PC with only
USB terminals and an instrument with only
MIDI terminals.
18_Part XIII.fm 185 ページ ２００３年２月５日 水曜日 午後２時０分