Filter
Top Products
Part II Playing the rhythm
57
QQTG0692
Playing the rhythm
Fade In/Fade Out
Add interest to your performance by starting a part with a fade-in or ending it with a fade-out.
• KN2600: does not work for the SD-AUDIO data playback.
FADE IN
At the beginning of the song, the volume of each
part rises slowly.
1.
Set up the panel settings for your perform-
ance.
2.
Turn on the FADE IN button.
• The indicator flashes. In this condition, the vol-
umes for all parts change to 0 and no sound is
produced from this instrument until the FADE
IN is turned off or until step 3 is executed.
3.
Play the keyboard or press the START/STOP
button.
• The volume slowly builds to its preset level.
• For the fade-in effect for a rhythm part or when
playing back a SEQUENCER performance,
turn on the FADE IN button before pressing
the START/STOP button.
• At the end of the fade-in, the FADE IN indica-
tor goes out.
• During the fade-in, FADE IN is shown in the
upper right part of the normal display.
FADE OUT
At the end of the song, the volume of each part
gradually fades to nothing.
1.
Start the performance.
2.
Turn on the FADE OUT button at the point you
want the fade-out to start.
• The volumes of all the parts slowly fade to 0.
• The indicator flashes to show that fade-out is
completed, and then goes out. The volumes
for all parts return to their specified settings.
• If you wish to interrupt the fade-out, press the
FADE OUT button to turn it off.
FADE
IN OUT
FADE
IN OUT
07_Part II.fm 57 ページ ２００３年２月５日 水曜日 午後２時４０分