Filter
Top Products
Part IV Sequencer
85
QQTG0692
Sequencer
6.
During playback, press the PUNCH IN button
at the point you want to begin recording.
• Recording begins as soon as the PUNCH IN
button is pressed. Begin playing at this point.
• The REC indication changes to the PUNCH
indication.
• The PUNCH IN button switches to the REC
STOP button.
7.
Press the REC STOP button at the point you
want to stop recording.
• Punch recording stops immediately.
• You can also begin punch-in recording by
playing the keyboard.
• You can specify the punch-in/punch-out points
with the optional Foot Switch (sold sepa-
rately). (Refer to page 172.)
Ⅲ
ⅢⅢ
Ⅲ
AUTO PUNCH RECORD
You can also set the punch-in and punch-out
points beforehand, so that recording automati-
cally begins and ends at the specified points.
1.
On the PUNCH RECORD display, press the
AUTO: OFF button.
• The display looks similar to the following.
2.
Use the FIRST MEASURE
∧
and
∨
buttons to
specify the number of the punch-in measure.
3.
Use the LAST MEASURE
∧
and
∨
buttons to
specify the number of the punch-out measure.
• The number of the LAST measure must be
higher than the number of the FIRST mea-
sure.
• The specified measure is recorded.
4.
Use the COUNT IN MEASURE
∧
and
∨
but-
tons to specify the number of lead-in mea-
sures you wish to have played back before the
punch-in measure.
• Set the metronome to on or off with the ON or
OFF button.
5.
Press the EXIT button.
• The display changes to the PUNCH RECORD
display.
6.
Press the START/STOP button.
• Playback begins from the measure indicated
by CURRENT MEASURE on the display.
• Pertinent information, such as the FIRST
MEASURE, is shown in the upper section of
the display.
7.
Correct the performance.
• The mode changes automatically to the
recording mode at the specified FIRST mea-
sure. Begin playing at this point. The mode
automatically changes back to the playback
mode at the specified LAST measure.
• To discontinue punch recording in the middle,
press the CANCEL button. In this case, the
recorded contents up to that point are erased.
09_Part IV.fm 85 ページ ２００３年２月５日 水曜日 午後１時３４分