Panasonic SX-KN2400 Mouse User Manual


 
Part VI Disk Drive (KN2400)
122
QQTG0692
Disk Drive (KN2400)
COMPOSER LOAD
Load COMPOSER data only from a disk.
1.
In the RHYTHM GROUP section, press and
hold the LOAD (MEMORY) button for a few
seconds.
The display looks similar to the following.
2.
Select the name of the file you wish to load.
3.
Press the LOAD button.
Data is loaded to this instruments COM-
POSER memory (MEMORY).
Direct Play
You can enjoy immediate playback of Standard MIDI File (SMF), Disk Orchestra Collection (DOC) and
PianoDisc disksall without loading the song data.
1.
Insert the disk with the stored data into the
Disk Drive.
2.
On the DISK MENU display, select DIRECT
PLAY.
The display looks similar to the following.
<Example: SMF>
3.
Use the buttons below the display to select the
song you wish to have played.
If the number of files is 10 or more, you can
use the PREV and NEXT buttons to go back
or advance 10 files at a time.
For SMF files, use the PLAY AS button to
specify a sound arrangement mode.
GM2: GENERAL MIDI LEVEL 2
NX: NX SOUND
PREV. TEC: Data from Technics instruments
not having NX SOUND capability.
For SMF files, you can use the INFO button to
switch the displayed data.
DISK: Disk name
SONG: Song name
For SMF files, use the MIDI OUT button to
specify whether or not MIDI data is output dur-
ing playback (ON/OFF). (This cannot be
changed during playback.)
4.
Press the START button.
The selected song is played back.
Adjusting the playback tempo
Even with a song having recorded tempo data,
you can use TEMPO/PROGRAM or TAP
TEMPO to adjust the tempo to your liking.
When the tempo is changed, all the tempo
data of that song is automatically changed by
the same ratio. Accordingly, even in song data
in which tempo change data is stored, a single
adjustment of the tempo produces a natural-
sounding playback.
RHYTHM GROUP
POP ROCK DANCE POP BALLAD
SIMPLE
BEAT
DANCE
CLUB
TRAD &
WALTZ
USA
JAZZ &
SWING
BALLROOM
& SHOW
LATIN &
WORLD MEMORY
LOAD
11_Part VI.fm 122 ページ 2003年2月5日 水曜日 午後2時43分