Filter
Top Products
157
QQTG0692
Sound Edit
Part X Sound Edit
Outline of the Sound Edit
SOUND EDIT enables you to create your own new sound by altering one of the this instrument’s preset
sounds. Your new sound can be stored in one of the sound memory locations. SOUND EDIT has two
methods of use. You can edit in detail using functions more commonly associated with a synthesizer, or
you can use EASY EDIT which allows you to change some basic parameters on one page.
1.
Select a sound to edit.
2.
Turn on the PROGRAM MENUS button.
• The display looks similar to the following.
3.
Select SOUND EDIT.
• The display looks similar to the following.
4.
Select the desired menu and follow the proce-
dures on the corresponding setting display.
• To check the sound of a single tone, press the
SOLO button to highlight the SOLO indication.
Only the currently selected tone sounds when
a key is played.
• When the TEMPO/PROGRAM indicator is lit,
it indicates that the TEMPO/PROGRAM is
available for setting the current function.
5.
When the sound is just the way you like it, on
the SOUND EDIT MENU display press the
WRITE button to store your new sound.
• Press the EDITED (or ORIGINAL) button to
switch between the modified sound (EDITED)
and the original sound (ORIGINAL). This
allows you to compare the edited sound to the
original sound as you are modifying it.
PROGRAM
MENUS
EASY EDIT (page 158)
The most often used edit functions—such
as brightness and attack speed—are
assembled on one display for easy sound
modification.
TONE (page 159)
Modify the tones which make up the sound.
PITCH (page 162)
Adjust the settings related to the pitch.
FILTER (page 163)
Adjust the amount of frequency cut in spe-
cific frequency ranges.
AMPLITUDE (page 165)
Volume settings.
LFO (page 167)
Cyclic modulation settings.
EFFECT (page 168)
Settings related to the various effects
applied to the sound.
CONTROLLER (page 169)
Specify how wheel operation etc. affects
the sound.
Summary of the SOUND EDIT menu items
15_Part X.fm 157 ページ ２００３年２月５日 水曜日 午後１時５５分