Filter
Top Products
Part XII Customize
175
QQTG0692
Customize
Display Time Out
Numerous message displays and setting displays conveniently guide you through the operation steps of
this instrument. Once you become familiar with the operation of your instrument, however, you may wish
to shorten or even suspend the display time of the message displays.
1.
On the CUSTOMIZE display, select DISPLAY
TIME OUT.
• The display looks similar to the following.
2.
Use the DISPLAY TYPE
∧
and
∨
buttons to
select the function.
SAVE REMINDER:
Reminder display (OFF, DEFAULT, HOLD, 1
to 10 sec)
‘COMPLETED’ MESSAGE:
Operation successfully completed (OFF,
DEFAULT, HOLD, 1 to 10 sec)
ARE YOU SURE?:
Display requires user action for confirmation
(OFF, DEFAULT, HOLD)
ERROR MESSAGE:
Error notification display (DEFAULT, HOLD, 1
to 10 sec)
SOUND/RHYTHM SELECT:
Sound/rhythm and PERFORMANCE PADS
BANK selection display (DEFAULT, HOLD, 1
to 10 sec)
EASY SETTING:
Display time when the setting display was
accessed pressing and holding a panel button
(DEFAULT, HOLD, 1 to 10 sec)
• When set the OFF, the display will not appear.
• When set to DEFAULT, the display time
returns to the initialized setting.
• You can specify 1 to 10 seconds for the dis-
play time.
• When set to HOLD, the DISPLAY HOLD auto-
matically turns on.
3.
Use the TIME
∧
and
∨
buttons to change the
setting.
4.
Press the OK button.
• Some messages may be displayed even if
they are set to OFF.
17_Part XII.fm 175 ページ ２００３年２月５日 水曜日 午後１時５８分