Filter
Top Products
Part X Sound Edit
158
QQTG0692
Sound Edit
• When DRUM KIT sounds are selected and the
SOUND EDIT is activated, the setting display
looks different from that for other sounds, but
the basic operation is the same. (To specify
the percussion instrument you wish to edit,
use the
∧
and
∨
buttons to select the sound
name, or alternatively, while pressing the key-
board key for the corresponding sound, press
the NOTE SELECT button.)
• To record the DIGITAL DRAWBAR settings,
first adjust the settings, then enter the SOUND
EDIT mode, press the WRITE button and fol-
low the procedure on the display.
Easy Edit
The most commonly used edit functions are consolidated on one display, providing convenient and quick
editing operation.
1.
On the SOUND EDIT menu display, select
EASY EDIT.
• The display changes to the following.
2.
Use the buttons below the display to specify
the value of the attribute.
• An effect may remain unchanged when EASY
EDIT is used to set the value, if another EDIT
function was first used to set the value to its
upper or lower limit.
3.
Press the WRITE button to store your new
sound.
• Storing your new sound is explained on page
169.
• If a sound is stored in the EASY EDIT mode,
and is later selected in the EASY EDIT mode,
the displayed value of an attribute may be dif-
ferent from the value when it was stored. The
sound itself, however, is exactly as it was
stored.
BRILLIANCE:
Adjust the brightness of the sound.
VIBRATO DEPTH:
Set vibrato depth.
VIBRATO SPEED:
Set vibrato speed.
VIBRATO DELAY:
Set time delay between key played and
vibrato start.
OCT SHIFT:
Shift the octave range.
ATTACK:
Adjust attack time.
RELEASE:
Adjust time of sound fade-out after key is
released.
D. EFF:
Select type of effect. (Refer to page 168)
Easy Edit items
15_Part X.fm 158 ページ ２００３年２月５日 水曜日 午後１時５５分