Filter
Top Products
Part IV Sequencer
83
QQTG0692
Sequencer
Naming
Here is the way to assign a name to your recorded song.
1.
On the SEQ MENU display use the SONG
SELECT
∧
and
∨
buttons to select a song.
2.
Press the NAMING button.
• The display looks similar to the following.
3.
Use the buttons below the display to assign a
name.
• Set the character input position with the POSI-
TION buttons, select the characters with the
alphanumeric buttons and repeat name
assignment.
• Switch from upper to lower case letters with
the ABC, abc button.
• Press the INS button to enter a space at the
cursor position.
• Press the DEL button to erase the character at
the cursor position.
• Press the CLR button to erase the entire
name.
• Press the →← button to center the name.
4.
Press the OK button.
Panel Write
You can change the panel status which is in effect at the beginning of the song. These are the settings
which are recalled when the SEQUENCER RESET button is pressed.
1.
On the SEQ MENU display, use the SONG
∧
and
∨
buttons to select the song number.
Then select PANEL WRITE.
• The display looks similar to the following.
2.
Use the panel buttons to change to the
desired panel settings.
3.
Press the OK button.
•“COMPLETED!” is shown on the display.
• PANEL WRITE is automatically activated at
the when you start to record.
• For rhythm data, the data in the RHYTHM part
has priority.
09_Part IV.fm 83 ページ ２００３年２月５日 水曜日 午後１時３４分