Filter
Top Products
Part I Sounds and effects
39
QQTG0692
Sounds and effects
Assigning parts to
the keyboard
The CONDUCTOR buttons are used to assign the parts (RIGHT 1, RIGHT 2, LEFT) to the keyboard in
many different ways. For example, you can split the keyboard into right and left sections (SPLIT), and
assign a different sound to each section.
CONDUCTOR
• The volume for each part can be adjusted independently. (Refer to page 30.)
• The following conditions are in effect when the AUTO PLAY CHORD is used.
—BASIC, ADVANCED mode: You cannot assign sounds to all the keys.
—PIANIST mode: The keyboard cannot be split.
CONDUCTOR settings How sounds are assigned to the keyboard
All keys produce the RIGHT 1 sound.
All keys produce the RIGHT 2 sound.
All keys produce both the RIGHT 1 sound and the RIGHT 2 sound.
The left keys produce the LEFT sound and the right keys produce the
RIGHT 1 sound and the RIGHT 2 sound.
The left keys produce the LEFT sound and the right keys produce the
RIGHT 1 sound.
The left keys produce the LEFT sound and the right keys produce the
RIGHT 2 sound.
LEFT RIGHT 2 RIGHT 1
CONDUCTOR
RIGHT 1
LEFT RIGHT 2 RIGHT 1
CONDUCTOR
RIGHT 2
LEFT RIGHT 2 RIGHT 1
CONDUCTOR
RIGHT 1 + RIGHT 2
LEFT RIGHT 2 RIGHT 1
CONDUCTOR
LEFT RIGHT 1 + RIGHT 2
LEFT RIGHT 2 RIGHT 1
CONDUCTOR
LEFT RIGHT 1
LEFT RIGHT 2 RIGHT 1
CONDUCTOR
LEFT RIGHT 2
06_Part I.fm 39 ページ ２００３年２月５日 水曜日 午後２時３８分