Filter
Top Products
Part IV Sequencer
74
QQTG0692
Sequencer
SEQUENCER menu
The configuration of the SEQUENCER setting
display is as follows.
1.
Press the PROGRAM MENUS button to turn it
on.
• The display looks similar to the following.
2.
Select SEQUENCER.
• The display looks similar to the following.
(KN2600)
•The SONG
∧
and
∨
buttons are used to select
a song.
• You can press the NAMING button and assign
a name to the song. (Refer to page 83.)
• You can press the PANEL WRITE button to
store the current settings of the instrument at
the beginning of the song. (Refer to page 83.)
• KN2600: Pressing the SD AUDIO SYNCHRO
button will set the synchronization of the
SEQUENCER playback and the sound data
stored in the SD card. (Refer to page 103.)
3.
Select RECORD & EDIT, COPY & PASTE or
RANGE SET, and follow the corresponding
procedure.
<RECORD & EDIT>
<COPY & PASTE>
<RANGE EDIT>
PROGRAM
MENUS
09_Part IV.fm 74 ページ ２００３年２月５日 水曜日 午後１時３４分