Filter
Top Products
191
QQTG0692
No. Contents
00
The data on the disk that you are
using is for a different product.
01
An error has occurred while the disk
was loading.
Please try again!
02 There is no disk in the Disk Drive.
03 The file that you tried to load is empty.
05
An error has occurred while the disk
was saving.
Please try again!
06
The disk that you are using is write
protected.
Please remove the write protection
and try again.
07
The disk that you are using is full.
Please use another disk.
08
An error has occurred while the disk
was formatting. The disk that you are
using may be faulty.
Please try formatting another disk.
10 The data is already copy protected.
15
The song you are trying to save is
empty.
16
This STANDARD MIDI FILE is incom-
patible with this instrument and cannot
be loaded.
17 This is not a STANDARD MIDI FILE.
18
The timebase (PPQ resolution) that
you tried to load is not
24/48/96/192/288/384 PPQ.
20
A problem has occurred with your
SEQUENCER Data.
This might be due to a damaged or
faulty disk.
21 Memory full
22
It is necessary to press REC STOP to
complete this procedure.
23
It is impossible to change the time sig-
nature because it has already been
set in the existing tracks.
24
A rhythm track already exists. It is
impossible to assign two tracks to
rhythm.
25
It is only possible to change the veloc-
ity on a melody track.
26
It is only possible to merge melody
tracks.
Tracks such as rhythm, chord and
control cannot be merged.
27
It is only possible to copy melody
tracks.
Tracks such as rhythm, chord and
control cannot be copied.
28
This song is too long to be saved as a
MIDI file.
29
The MIDI file that you have tried to
load exceeds the memory capacity of
this instrument and cannot be played.
The SEQUENCER memory has been
cleared.
30
It is not possible to change the time
signature of a COMPOSER pattern
after it has been recorded.
If you want to proceed, you must first
clear the entire COMPOSER pattern.
31
The time signature of the pattern from
which you are copying is different from
the COMPOSER memory that you are
using.
Either: Change the time signature of
the COMPOSER memory
or: Copy from a pattern that has
the same time signature
32 Memory full
33
Select a Track before setting parame-
ters for AUTO PUNCH RECORD.
43
The file that you are trying to load was
saved on a previous KN keyboard. It is
only possible to load using the “PER-
FORMANCE” option.
44
It is impossible to edit a Drum Kit.
Please select a different sound from
any group except Keyboard Percus-
sion.
46
It is only possible to insert MELODY
Tracks. Tracks such as RHYTHM,
CHORD and CONTROL cannot be
inserted.
47
This procedure is not possible with a
composer pattern or the metronome.
Please select a preset rhythm pattern.
54
It is not possible to record using preset
banks, compile banks, or control
banks. Please select one of the user
banks.
55
Special tracks such as CHORD
(APC), RHY and CTL exist in the song
from which you are copying and are
incompatible with the destination song
because it is in the GM mode.
No. Contents
Error messages
19_Initialize.fm 191 ページ ２００３年１月２７日 月曜日 午後１時５６分