Panasonic SX-KN2400 Mouse User Manual


 
Part X Sound Edit
163
QQTG0692
Sound Edit
PITCH ENVELOPE TOUCH & KEY FOLLOW
Specify how the pitch envelope changes in rela-
tion to note pitch.
1.
Use the PAGE buttons to view the 4/4 display.
2.
Use the buttons to left of the display to select a
tone.
Use the and buttons to select a setting
item and then the
and
buttons to specify a
selection.
3.
Use the TOUCH
and
buttons to change
the respective touch settings.
Use the TIME
and
buttons to specify the
time change depending on touch. Use the
LEVEL
and
buttons to specify the pitch
change level depending on touch.
At a setting, the softer the keys are pressed,
the greater the change. At a + setting, the
harder the keys are pressed, the greater the
change.
4.
Change the key follow settings for the
ATTACK, DECAY and RELEASE.
Use the
and
buttons corresponding to the
ENVELOPE KEY FOLLOW attributes to
adjust the settings. Use the CENTER
and
buttons to select the center of the bend direc-
tion.
Filter Edit
Make major changes to the sound by eliminating specific frequency ranges.
FILTER & EQUALIZER
1.
On the SOUND EDIT menu, select FILTER.
The display looks similar to the following.
2.
Use the buttons to the left of the display to
select a tone.
Use the and buttons to select a setting
item and then the
and
buttons to specify a
selection.
3.
Use the MODE button to select the filter mode.
LPF(6)+EQ (low-pass filter + equalizer)
Signals higher than the cut-off frequency are
cut. Normal sounds are softened.
HPF(6)+EQ (high-pass filter + equalizer)
Signals lower than the cut-off frequency are
cut. Normal sounds are sharpened.
LPF24 (low-pass filter 24)
A stronger low-pass filter than LPF+EQ.
HPF24 (high-pass filter 24)
A stronger high-pass filter than HPF+EQ.
BPF (band-pass filter)
Cuts off signals that are not within in the area
between the two specified CUTOFF frequen-
cies.
For this mode, adjust the settings on the
EQUALIZER/FILTER side as well.
THRU
No filter effect is applied.
15_Part X.fm 163 ページ 2003年2月5日 水曜日 午後1時55分