Filter
Top Products
28 C2928M-A (4/07)
IMAGE POSITIONING
After the aspect ratio has been set, the image position on the screen can be adjusted.
The following procedure is required for a stand-alone unit and all units in a wall system.
To adjust the position of the image, refer to Figure 18 and do the following:
1. Press the MENU button on the remote.
2. Scroll down to Aspect Ratio & Wall, and then press +.
3. Scroll to Justify, and then press + on the remote control.
4. Select the appropriate setting. Press + to toggle through the following choices:
• Select Center, which places the image in the exact center of the wall.
• Select Bottom Right if the image is too wide for the wall and is cropped on the sides.
• Select Top Left if the image is too tall for the wall and is cropped on the top and bottom.
5. Press the MENU button on the remote to close the menu.
Figure 18. Justifying
Main Menu
Picture
Size & Position
Advanced Options
Program Information
Aspect Ratio & Wall
Memory
Diagnostics
Aspect Ratio & Wall
Scale Mode
Justify
Overscan
Border Color
Fill All
Center
0 %
Black