Filter
Top Products
34 C2928M-A (4/07)
SAVING AND RECALLING ADJUSTMENTS AND DELETING A MEMORY
The PMCD750 has 40 numbered memory slots that can be used to save and recall image adjustments and apply them to a specific source and
input. Once assigned, the input will have these image adjustments applied each time the associated source is detected. Each input can have mul-
tiple sources and associated preferences.
An example of this application would be having a computer connected to the Analog 1 input. The Analog 1 input can have one of the 40 settings
applied to it each time that specific source computer is detected at the Analog 1 input. If the input source changes, the same settings will still be
applied, but if you wish to assign different settings for the new source, selecting a different memory slot will apply the new settings each time
that source is detected at the Analog 1 input. If the previous source is detected, the previous settings will be applied. This flexibility can be
applied to each of the video inputs.
SAVING ADJUSTMENTS
The following procedure is required for a stand-alone unit and all units in a wall system.
To save image adjustments, refer to Figure 24 and do the following:
1. Make all image adjustments. Refer to the Alignment and Adjustment section.
2. Press the MENU button on the remote.
3. Scroll down to Memory.
4. Press + on the remote.
Figure 24. Saving Adjustments
Main Menu
Picture
Size & Position
Advanced Options
Program Information
Aspect Ratio & Wall
Memory
Diagnostics
Memory
Recall
Save
Delete
Save
1 9 17 25 33
2 10 18 26 34
3 11 19 27 35
4 12 20 28 36
5 13 21 29 37
6 14 22 30 38
7 15 23 31 39
8 16 24 32 40