Filter
Top Products
44 C2928M-A (4/07)
BAUD RATE
Each display’s baud rate must be set to the computer’s and controller’s baud rate. The baud rate is not automatically established, as it is in
modems.
To set the baud rate, refer to Figure 31 and do the following:
1. Press MENU on the remote.
2. Scroll down to Advanced Options, and then press +.
3. Scroll down to Serial Port Settings, and then press +.
4. Scroll down to Baud Rate.
5. Use the – and + buttons to change the value.
6. Press MENU to exit the menu.
Figure 31. Baud Rate
Main Menu
Picture
Size & Position
Advanced Options
Program Information
Aspect Ratio & Wall
Memory
Diagnostics
Advanced Options
Color Balance
Miscellaneous Options
Engine Alignment
Menu Options
Lamp Settings
Serial Port Settings
Auto Setup Options
Serial Port Settings
Group ID
Unit ID
ASCII Response Type
ASCII Response Terminator
Baud Rate
2
6
Symbolic
CR
2400
Terminate RS-485