Filter
Top Products
36 C2928M-A (4/07)
RECALLING SLOT PREFERENCES
The following procedure is required for a stand-alone unit and all units in a wall system.
To recall stored preferences, refer to Figure 25 and do the following:
1. Press the MENU button on the remote.
2. Scroll down to Memory.
3. Press ENTER on the remote.
4. Scroll down to Recall.
5. Press ENTER.
6. Use the
", !, #, and $buttons on the remote to navigate to the desired checked box. Unchecked (empty) boxes cannot be
selected.
7. Press ENTER. The settings for the selected slot are displayed. If the settings in the slot are identical to those currently in use, “Current” will
appear on the top line. To exit this menu without applying these settings, press PREV on the remote control. Otherwise, go to step 8.
8. Scroll to Recall Now.
9. Press ENTER to apply the selected slot settings.
Figure 25. Recalling Adjustments
Main Menu
Picture
Size & Position
Advanced Options
Program Information
Aspect Ratio & Wall
Memory
Diagnostics
Memory
Recall
Save
Delete
Recall
1 9 17 25 33
2 10 18 26 34
3 11 19 27 35
4 12 20 28 36
5 13 21 29 37
6 14 22 30 38
7 15 23 31 39
8 16 24 32 40