Filter
Top Products
42 C2928M-A (4/07)
SELECTING A SOURCE
The source is the image coming into the PMCD750 display.
NOTE: If a “Source Absent” message appears on the screen, this indicates that there is no video coming into that input or that the signal is not
viewable.
To select a source, refer to Figure 29 and do the following:
1. Press MENU on the remote control.
2. Scroll down to Picture and then press + on the remote.
3. Use the
"and !buttons to navigate to the desired source.
4. Press ENTER on the remote. The video (if present) will now be displayed.
5. If the selected input is not the desired one, repeat steps 3 and 4.
6. Press MENU on the remote control to exit the menu.
Figure 29. Selecting a Source
Main Menu
Picture
Size & Position
Advanced Options
Program Information
Aspect Ratio & Wall
Memory
Diagnostics
Analog 1
Analog 2
Digital
Picture
Pixel Frequency 65.02 MHz
Sync Type Separate H&V
Vertical Frequency 60 Hz
Horizontal Frequency 43.38 kHz
Input Levels
Horizontal Resolution 1280
Vertical Resolution 768
Source Analog 1
Colorspace RGB
Sharpness Sharpest
Frequency - + 1344
Phase - +