Filter
Top Products
32 C2928M-A (4/07)
POSITION AND ZOOM
Position moves the picture on the screen. This is not the same as optical engine alignment. Zoom adjusts the edges of the image to make them
fit with the other images in a wall.
NOTE: If the screen has a black edge on one or both sides and the image cannot be repositioned to cover it, the optical engine must be adjusted.
Refer to the Aligning the Optical Engine section.
PICTURE POSITION ADJUSTMENT
The following procedure is required for a stand-alone unit and all units in a wall system.
If necessary, adjust the position of the image. Refer to Figure 22 and do the following:
1. Press the MENU on the remote control.
2. Scroll down to Size & Position, and then push +.
3. Select Picture Position, and then press +. The numeric values for the current horizontal and vertical position of the image are displayed.
4. Make necessary adjustments.
a. To adjust horizontally, use the + and – buttons.
b. To adjust vertically, use the
" and ! buttons.
5. Press the MENU button on the remote to close the menu.
Figure 22. Picture Positioning
Main Menu
Picture
Size & Position
Advanced Options
Program Information
Aspect Ratio & Wall
Memory
Diagnostics
Size & Position
Picture Position
Zoom Window Top & Left
Reset All Windows to Default
Zoom Window Botom & Right
Viewport Window Top & Left
Viewport Window Bottom & Right
Picture Position
Use arrow keys to move image
Horizontal Position 256
Vertical Position 28