Filter
Top Products
C2928M-A (4/07) 31
HD INTERLACED CONTENT
When displaying 1080i video sources, deinterlacing artifacts can sometimes be visible. HD interlaced content can minimize or eliminate these
artifacts to produce a sharper image. There are two levels of this function.
Normal: For static (still) and normal motion images.
Rapid: For images with rapid movement, such as an auto race.
The following procedure is required for a stand-alone unit and all units in a wall system.
To adjust HD interlaced content, refer to Figure 21 and do the following:
1. Press MENU on the remote control.
2. Scroll down to Advanced Options, and then press + on the remote control.
3. Scroll down to Miscellaneous Options, and then press + on the remote.
4. Scroll down to HD Interlaced Content.
5. Press ENTER on the remote. Each press will change the setting.
6. Press MENU to exit the menu.
Figure 21. HD Interlaced Content
Main Menu
Picture
Size & Position
Advanced Options
Program Information
Aspect Ratio & Wall
Memory
Diagnostics
Advanced Options
Color Balance
Miscellaneous Options
Engine Alignment
Menu Options
Lamp Settings
Serial Port Settings
Auto Setup Options
Miscellaneous
Beeper
Curtain Pattern
Preferred Source Detection 16 x 9
HD Interlaced Content
White
Normal
Auto Codes
Plug and Play (EDID Enable)
Inverted Installation