Filter
Top Products
MGC+ Hardware and Installation Manual
4-35
• From a non-encrypted conference to an encrypted conference or another
non-encrypted conference.
When the ALLOW_ENCYPT_IN_PARTY_LEVEL flag is set to NO, the
participant’s encryption setting must match the conference encryption
setting’s to be moved to the other conference. For example, encrypted
participants can only move from an encrypted conference to another
encrypted enabled conference.
MUX+ Resource Report
MGC-50/100 Resource Report
The Resources Report, displays the total number of MUX+ port resources
available according to the card type, line rate and encryption.
In the example shown here, the system lists the total number of ports
available with the MUX+20 card for both non-encrypted and encrypted
participants, based on their connection line rates. At a line rate of 128 Kbps,
up to 36 non-encrypted and 18 encrypted participants can connect to
conferences. At a line rate of 384 Kbps, 20 non-encrypted and 10 encrypted
participants can connect to conferences running on the MCU.