Polycom DOC2238A Network Router User Manual


 
MGC+ Hardware and Installation Manual
2-47
a. In the Browser pane, right-click the MCUs Network icon, and then
click New MCU.
The Add MCU dialog box opens.
b. In the Name box, enter the name of the MCU. Specify a name that
clearly identifies the MCU.
c. In the IP Address box, enter the default IP Address of the MCU
(129.254.4.8).
d. Click OK.
The new MCU is added to the MCUs list.
8. In the MCUs list, double-click the MCU icon to connect to it.
9. Modify the IP address of the MCU unit as allocated by the network
administrator (this is the IP address with which the MCU is identified on
the LAN).