Polycom DOC2238A Network Router User Manual


 
MGC+ Hardware and Installation Manual
5-21
The serial number displayed in the Dongle Information dialog box
should match the serial number on the Dongle. If the numbers do not
match, do not proceed and contact support.
Shutting Down the MGC+ 50/100
Use the following procedure for both the MGC+100 and the MGC+50 to turn
off the MGC+ 100/50:
1. Exit the MGC Manager application, as described in the MGC Manager
User’s Guide.
2. Switch off the main power switch on the rear panel and disconnect the
power cord from the power source.