![](http://pdfasset.owneriq.net/3/81/381793d4-e8a2-4398-b3e4-62596f910c3d/381793d4-e8a2-4398-b3e4-62596f910c3d-bg2f.png)
MGC+ Hardware and Installation Manual
2-27
3. Release the clasp locks at the bottom, and lift the MGC+50 top cover.
Figure 2-13: Unpacking the MGC+50
4. Lift the MGC+50 unit and remove the package base.
5. Lower the MGC+50 unit, placing it on the surface.
If you are rack mounting the MGC+50, allow a minimum clearance of 3
inches above the unit.
Foam Block
Foam Block
Wood Packing Case