Filter
Top Products
MGC+ Hardware and Installation Manual
5-19
When these parts require replacement, please contact Polycom Resource
Center.
Replacing the Dongle
The Dongle is installed on COM1 on the Control Unit (CU) rear panel I/O
with a bracket. Prior to replacing a dongle, please contact Polycom Resource
Center.
1. Remove the bracket by removing the screws and unplug the dongle.
You are required to use only parts approved by Polycom, or supplied in the
Polycom accessories kit.
Table 5-1: Compact Flash Kit
Item # Polycom P/N Description
1
MSC2042A Reader/Writer, Compact Flash Type I
To USB 2.0
2
ICM2025A IC Memory Compact Flash Card
128MB Type I
ALARMS
COM2
COM1
KEYBOARD
MOUSE
VGA
LAN
POLYCOM
R
WARNING
Product warranty will
be void if seal label is
removed or damaged.