![](http://pdfasset.owneriq.net/3/81/381793d4-e8a2-4398-b3e4-62596f910c3d/381793d4-e8a2-4398-b3e4-62596f910c3d-bg32.png)
Chapter 2 - Hardware Installation
2-30
9. Insert the functional modules removed earlier into the MGC+50.
10. Mount the Power Supply module, Main Control Module and Server
panel back in their place as described in Chapter 5, “Replacing the Main
Control Module” on page 5-17. Also see Chapter 5, “Replacing the
Power Supply Module on the MGC+50” on page 5-11.
Screw mounting
plate from the
inside of the MGC+