Filter
Top Products
Chapter 2 -
2-4
Web User Interface (UI)
Item Details
Sessions recording by 2 endpoints. This implies that it can support
either two single-point recording sessions or one
point-to-point recording session.
Activation Status
Displays whether the RSS 2000 has been activated. This
field will show "Not activated" when the device has not
been activated after a software upgrade, and will otherwise
show "Activated". Only an activated RSS 2000 can perform
normal recording. Please refer to the
Product activation
section for detailed information concerning activation.
Multicast
Displays whether the multicast function is activated. When
the multicast module is activated
is displayed.
Configure multicast parameters in the "Recording
parameters-> multicast settings" page. See
multicast
settings
for details. When not activated, is displayed.
To use the multicast function, acquire a multicast-activated
product key code. Steps for activating the multicast
function are the same as those for new device activation.
Please refer to the
Product activation section for further
information.
Clustering
Shows whether the device's clustering function has been
activated. When the network includes several RSS 2000
devices, you can use the clustering function on one RSS
2000 to play video files stored on other RSS 2000 servers.
will be shown here when the clustering function has
been activated. Clustering parameters can be set via
"System configuration-> Clustering settings“. Please refer
to the
Clustering settings section. If the clustering function
has not been activated,
will be shown here. To use
the clustering function, you must re-activate the device
using an activation code containing the clustering function.
Clustering function activation involves the same steps as
new device activation; please refer to the
Product
activation
section for further information.
V3.0 Key code
activation
Shows whether Version 3.0 is activated for this system.
When the RSS 2000 has been activated successfully using
the Upgrade Key code for version 3.0,
will be shown
here, otherwise
will be displayed.
System Usage
Click on "System Usage" in the navigation bar on the left side of the screen to
view the RSS 2000's current hard drive usage, CPU usage, current device
time, and synchronization of device time and time on current computer.