Filter
Top Products
Polycom RSS 2000 User Guide
3-5
Stop Recording
Use the remote control to select Stop to stop the current recording and
generation of a video file. The user will hear the IVR message "The
conference recording has ended".
• The RSS 2000's internal storage will reserve 500 MB of storage space. Recording
will be stopped and a video file created if the free hard drive space falls to less
than 500 MB during a recording.
• When the hard drive has less than 500 MB of available space, an IVR message
will tell the user that there is insufficient hard drive space if the user tries to start a
recording.
• If no audio/video data is received for 30 consecutive seconds during the recording
process, the RSS 2000 will terminate the connection.
Live Streaming
When the Live streaming option is selected, the RSS can allow web users to
view the bit stream while a non-HD/SD video is being recorded. The RSS
will decode the audio/video bit stream sent from the endpoint, and will
convert it in real-time to a WMV format that can be played on a PC. The RSS
2000's Web Interface can be used to initiate playback of the video, as shown
below. Click on the button
on the Live Streaming menu to view the video
in real-time.
Figure 3-6 Streaming a video
Immediate Recording
When an endpoint's immediate recording function has been enabled, the RSS
2000 will automatically start a recording (if recording resources are available)
when that endpoint calls into the RSS 2000.. This function ensures that the
user of this endpoint will not be prompted with onscreen menus. To enable
an immediate recording the user must have Administrator privileges to the
RSS 2000. Enter the "Account management -> Endpoints" page of the Web
management interface. If the desired endpoint is not in the list, click “New”
to add. If the desired endpoint is in the list, click on “modify endpoint
properties” and select Enable immediate recording, as shown below.